Thanks you, jacobsmith1. Don't overdo it!
ispank wrote:
For his idea number 2 ...
Thanks for the link! Too bad it's not working with this SS version.
There is another problem with this. The input will come in conflict with a button. This will only work while in wait or waitWithGauge.
ispank wrote:
For idea number 3 (adding pain levels). You could use the same max and min, just create more steps in between. For instance, right now, 1 is your min and 10 is your max. You could make 1 your min and 20 your max (20 would be the same file as your current 10) then each step in between would end up with a smaller delta amplitude. The change here is that right now if pain levels are set to (3-10) it would calibrate to 3. For me this sets power to 80% on my 2B for me. If you had 20 steps and I calibrated to 3, I would probably end up at 90% or 100% so therefore when I get to 20, it would be more painful. This would also help to have more granularity as the punishment progressed.
That's a good idea! I make this right away!
I make it so level 1=5%, 2=10%, 3=15% so on.